JVC HM-DSR100U - Manual (Page 126)

Page 5-34
User and
Installation Guide
E
DITING FROM A
C
AMCORDER
You can use a camcorder as the playback unit and the recorder as the recording unit to edit
rough footage into personal videos. Do the following:
1. Connect the camcorder's VIDEO OUT and
AUDIO OUT connectors to the recorder's
VIDEO IN and AUDIO IN connectors
using the supplied Audio/Video cable.
ࡗ If using a monaural camcorder, connect
its AUDIO OUT connector to the
AUDIO IN L connector on the recorder.
2. Load the cassette to be played into the
camcorder, and load the cassette to be
recorded into the recorder.
3. Set the recorder's input mode to AUX
by pressing the number button "000".
"AUX" will appear in the on-screen
display instead of a channel number.
ࡗ Select the SP or EP tape speed
(see page 5-5).
4. Start tape playback at the camcorder.
ࡗ If you do not want superimposed
on-screen characters and symbols from
the camcorder to be recorded onto the
edited tape, turn its superimpose
function off (if allowed by the
camcorder).
5. Start recording on the recorder.
Remote
Menu Options
Buttons
1 2 3
4 5 6
7 8
0
9