JVC HM-DSR100U - Manual (Page 96)

Page 5-4
4. Use the arrow buttons to select Bit Stream
(D-VHS) Recording "ON" or "OFF" in
the Mode section of the VCR Setup
screen. Refer to the next page for further
instructions.
ࡗ Bit Stream (D-VHS) Recording is possible
only when you record a satellite channel
using a D-VHS cassette, and when Bit
Stream (D-VHS) Recording setting is set
to "ON".
5. Use the arrow buttons to select the
Recording Speed ("SP" or "EP") for
analog recordings in the Mode section
of the VCR Setup screen. Refer to the
next page for further instructions.
ࡗ When EP is selected, the EP indicator
on the recorder's front panel lights.
ࡗ The recording speed for bit stream
(D-VHS) recordings remains unchanged
regardless of this setting.
6. Press the Rec (ord) button.
ࡗ The REC indicator on the front panel lights
during recording.
7. If you wish to pause recording at any time,
press the Pause button. Pressing the Play
button will resume recording.
ࡗ The REC and PAUSE indicators on the
front panel both remain lit while recording
is paused.
ࡗ While recording is paused, neither the channel
nor the recording speed can be changed. Press
the
Stop button first, and then change the
channel/recording speed as necessary.
8. Press the Stop button to stop the tape, and
then press the Eject button on the recorder's
front panel to eject the tape.
User and
Installation Guide
REC
EP
SP
Accidental erasure prevention
ࡗ To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.