JVC HM-DSR100U - Manual (Page 192)

Page A-20
E
VENT
T
IMERS
What Is
Happening
You try to set up an
event timer, but the
recorder displays an
ERROR message noting
that the event is locked.
You try to set up an
event timer, but the
recorder displays an
ERROR message noting
that the event is a pay
per view event.
You try to set up an
event timer, but the
recorder displays an
ERROR message giving
you the option to delete
a previously set up
event timer.
You set up an event
timer, but your recorder
does not tune to the
channel of the event, or
does not record the
event.
You set up an event
timer for an event that is
repeated (such as a
regularly scheduled
program), but the timer
does not execute for a
showing of the event.
You set up an event
timer, but the timer does
not execute at all.
You set up a Once event
timer, but the timer
executes at a different
time.
You stop the execution
of an event timer for one
showing of an event that
is repeated (such as a
regularly scheduled
program), but the timer
executes for the next
showing.
You set up an event
timer, but your recorder
stopped recording before
the event finished.
Possible Why
You must enter the system
password before you can create an
event timer for a locked event.
You must order a pay per view
event before you can create an
event timer for it.
You have already set up the
maximum number of event timers.
You may have set up a Reminder
Event Timer but what you should
have set up is an Auto-Tune Event
Timer or a VCR Event Timer .
You may have set up a timer with
an inappropriate frequency.
The event time may have changed
so that the event timer conflicted
with another event timer.
The event time may have changed
by more than twenty-four hours.
The event time changed.
Stopping the event timer applies
only to the current showing of the
event.
There may have been a power
outage during recording.
What to Do
To be able to set up an event timer for the event, first enter the
system password.
To be able to set up an event timer for the event, first order it.
To be able to set up a new event timer, delete one of the event
timers you previously set up.
Remember that a Reminder Event Timer only reminds you that
the event is about to start. An Auto-Tune Event Timer reminds
you and tunes the recorder to the channel of the event.
A
VCR Event Timer does all of the above and starts recording.
Remember that a Once event timer executes only one time. A
Mon-Fri event timer executes Monday through Friday on the
same channel at the same time. A Daily event timer does the
same, Monday through Sunday. A Weekly event timer executes
once a week on the same channel at the same time.
If the recorder is ON and detects an event timer conflict, it will
display the
Event Timer Scheduling Conflict menu. You must
delete one of the conflicting event timers.
No event timer will execute if the event time changes by more
than twenty-four hours.
A Once event timer always executes at the actual time of the
event.
To stop all executions of a repeated event timer, you must delete
the event timer. Note that a
Once event timer is automatically
deleted when it executes.
During recording (including ITR and EVENT TIMERS), if there
is an interruption in the power supply (as caused by power
outages), recording will stop and will not resume automatically.
User and
Installation Guide