JVC HM-DSR100U - Manual (Page 66)

Page 4-20
User and
Installation Guide
To lock the system, you must set a password:
ࡗ When you lock the system, you must enter and verify a 4-digit number password, which
you make up.
ࡗ Later, you must enter the same password to unlock the system, make changes to locked
features, or access locked programs.
When you have locked the system:
ࡗ If you try to access a locked program or channel, the recorder displays a message
prompting you to enter the password. You must also enter the password to access the
Parental and System Locks menu.
Ⅲ The system allows you three tries to enter the correct password.
Ⅲ If you do not enter the correct password in three tries, the system does not allow
more tries for several minutes.
ࡗ If you enter the correct password, you can then access the locked item or the
Parental
and System Locks menu.
ࡗ If you exit a locked item or the locks menu, you must reenter the password to access the
item or menu again.
If you forget your password, you will need to speak with a Service Center
Representative. You may need to provide the following information: (1) your
name; (2) your address; (3) your telephone number; (4) your recorder serial
identification number; and, (5) your Personal Identification Number (PIN), if
used.
C
REATING OR
M
ODIFYING
C
HANNEL
L
OCKS
1. Press the Mode button until the remote is in
SAT mode.
2. Press the Menu button to open the
Main Menu .
3. Select the Locks option.
Remote
Menu Options
Buttons
MODE
MENU
5
5 Locks