Starting your installation finding the satellites – JVC HM-DSR100U User Manual

Page 137

Advertising
background image

Page 6-11

F

INDING A

C

LEAR

L

INE OF

S

IGHT

"Finding a clear line of sight" means finding a location for the satellite antenna so that its
view of the orbiting satellites is unobstructed by trees, buildings, or any other obstructions.
This includes making sure that sapling trees are not likely to grow up or out into the line of
sight. Also, consider seasonal changes. An unobstructed site in winter may be obstructed by
foliage in spring and summer.

1. Take a compass and the direction and elevation

numbers to your planned location for the satellite
antenna.

Make sure the compass is at least a foot away from
other metal objects, and that there are no magnetic
objects or electronic devices nearby. Holding the
compass so the needle can swing freely, turn the
compass until the dark end of the compass needle is
aligned on the N. This points to magnetic North.

The compass face is divided into 360 degrees.
From your location, North is zero degrees (0˚),
East is 90˚, South is 180˚, and West is 270˚.

2. On the compass, find the direction number

provided by the

Point Dish and Signal Strength

menu. Turn to face this number, while keeping
the dark end of the needle over the N. This is the
direction to the satellites. Find a landmark, or lay
a stick or board on the ground that lines up in that
direction.

Starting Your Installation

Finding the Satellites

6

Advertising
This manual is related to the following products: