JVC HM-DSR100U - Manual (Page 171)

Page 7-25
M
ANUAL
C
LOCK
S
ETTING
If the recorder is connected to a properly installed DISH Network™ antenna, the recorder's
clock will be set automatically. However, if you ever need to set the clock manually be-
cause the DISH antenna has been disconnected, etc., do the following:
Remote
Menu Options
Buttons
1. Press the Mode button until the remote is in
SAT mode.
2. Press the Menu button to open the
Main Menu .
3. Select the VCR Setup option.
4. Press the arrow buttons to move the
highlight to Set Date/Time .
5. Press the Select button to open the
Time and Date Setup screen.
6. Press the Left or Right arrow button to
move the highlight to Daylight Savings .
7. Press the Select button to place a
checkmark in the checkbox next to
Daylight Savings . Pressing the Select
button again will remove the checkmark.
ࡗ Turn the Daylight Savings function to let
the recorder automatically adjust its clock
to Daylight Savings Time, or turn the
function off if Daylight Savings Time
does not apply to your area.
MENU
MODE
8
Installing and Wiring Your System
Manual Clock Setting
7
8 VCR Setup
Set Date/Time
SELECT
SELECT
Daylight Savings