JVC HM-DSR100U - Manual (Page 40)

Page 3-14
User and
Installation Guide
A
DDING
L
OCAL OR
C
ABLE
C
HANNELS
To add local broadcast or cable channels, do the following:
1. Press the Mode button until the remote
is in SAT mode.
2. Press the Menu button to open the
Main Menu .
3. Select the System Setup option.
4. Select the Installation option.
5. Select the Add Local Channel option. If
you are setting up your local channels for
the first time or switching options in the
Select Cable/Broadcast list, follow the
steps in order. Otherwise, go to step 8 to
add channels to the
Selected Local
Channels list.
6. Press the Left arrow button to move the
highlight into the Select Cable/
Broadcast list.
7. Press the Up or Down arrow button to
highlight either the Broadcast Channels
option or the appropriate Cable Channels
option (Standard, HRC, or IRC)(Contact
your cable TV provider for information on
whether you have a standard, HRC or IRC
cable system. Press the
Select button to
choose the channel option.
Note: You can add either cable (Standard, HRC, or IRC) or broadcast channels,
not both. If you add one type of channel and then select another option, the Selected
Local Channels list will not change. In that case, the channels in the list would not
be correct for the option you selected. So, whenever you change the option, you
should also edit the
Selected Local Channels list.
Remote
Menu Options
Buttons
T
H
E
M
E
6
2
MODE
MENU
1
6 System Setup
1 Installation
2 Add Local Chan.
Broadcast Channels
Standard Cable Channels
HRC Cable Channels
IRC Cable Channels
SELECT