JVC HM-DSR100U - Manual (Page 131)

Page 6-5
D
ISH
The dish reflects and focuses the signals from the satellites onto
the LNBF.
Flathead bolts with nuts attach the dish to the support arm
bracket.
LNBF S
CREW AND
W
ASHER
The LNBF screw and washer attach the LNBF to the end of the
support arm.
C
ABLE
C
LIP (OPTIONAL)
The cable clip holds the coaxial cable(s) to the top of the
support arm bracket.
M
OUNTING
B
RACKET AND
M
AST
A
SSEMBLY
The mast assembly attaches the support arm (which holds the
dish and the LNBF) to the mounting surface.
Note: If you are planning to use a pole to mount the satellite
antenna, you will not need the mast assembly. In this case, the
pole (instead of the mast) fits into the support arm bracket.
However, you should keep the mast assembly in case you
decide to relocate the satellite antenna.
6
Starting Your Installation
Components of the Satellite Antenna