Polycom RMX 1000 - Manual (Page 111)

Chapter 12 – IVR Service
12-6
Figure 12-5 Save the Format
9
The system returns to the Sound Selection dialog box.
10 Click OK. The system returns to the Properties for Sound dialog box.
11
Click OK. The system returns to the Sound–Sound Recorder dialog box.
You are now ready to record your voice message.
To record a new audio message:
1 On your PC, click Start -> Programs-> Accessories -> Entertainment ->
Sound Recorder. The Sound–Sound Recorder dialog box opens.
2
Click File -> New.
3 Click the Record button. The system starts recording.
4
Narrate the desired message.
5 Click the Stop Recording button.
6
Save the recorded message as a wave file, click File > Save As. The Save
As dialog box opens.
Figure 12-6 Save the Recorded Message
7 Verify that the Format reads: PCM 16.000 kHz or 32.000 kHz, 16 Bit,
Stereo or Mono. If the format is correct, continue with step 10. If the
format is incorrect, click the Change button. The Sound Selection dialog
box appears.
8 In the Name field, select the name of the format created in step 7, as