Polycom RMX 1000 - Manual (Page 35)

Chapter 3 – Basic Operation
3-8
Scenario Dial-in String
Create this conference, set the
above passwords, and invite the
above participants
9251001##1111##2222*123*321
If the gatekeeper is not configured on the network, the format of the dial-in
string is as follows:
<RMX 1000 IP address>[##Conference ID][##Conference
password][##Chairperson password][*Participant's IP address]
Here, the character in the <> symbol is mandatory, and that in [ ] is optional.
For example:
RMX 1000 IP address: 172.22.30.40
ID of the conference to be created: 1001
The table below shows the strings dialed by the endpoint under different
scenarios:
Table 3-3 Dial-in String Rule for H.323 Endpoints - Unregistered to GK
Scenario Dial-in String
Create this conference 172.22.30.40##1001
Create this conference and set:
Conference password: 1111
Chairperson password: 2222
172.22.30.40##1001##1111##2222
Create this conference and
invite:
Participant 1 - IP address:
172.22.30.1
Participant 2 - IP address:
172.22.30.2
172.22.30.40##1001*172.22.30.1*172.22.30.2
Create this conference, set the
above passwords, and invite the
above participants
172.22.30.40##1001##1111##2222*172.22.30.1*
172.22.30.2
SIP Endpoint
For an SIP endpoint, if the endpoint has been registered to the same SIP
server as RMX 1000, the dial-in number of SIP endpoint consists of the static
route domain name of RMX 1000 and conference information (such as the
conference ID, conference password, chairperson password and participant
address) in the format below:
[Conference ID][$$Conference password][$$Chairperson password][*
Participant's TEL URI/SIP URI]@<RMX 1000 static route domain name>
Here, the character in the <> symbol is mandatory, and that in [ ] is optional.
For example:
RMX 1000 static route domain name: polycom.com
ID of the conference to be created: 1001