Polycom RMX 1000 - Manual (Page 138)

15-1
15
Signaling and Hardware
Monitoring
Signaling Monitoring
To monitor the status of LAN1, LAN2, SIP, directory service and gatekeeper
of the device you are using, click Signaling Monitor in the RMX Management
pane. The signaling status list will be displayed in the list pane on the right
side.
Figure 15-1 Signaling Monitor Pane
The table below provides the status meanings of related parameters.
Table 15-1
Service Name Status Indication
LAN1 (LAN2)
Link up:
This network interface has been enabled and
connected.
Link down:
This network interface has been enabled but not
been connected.
Disabled:
This network interface is not enabled.