Polycom RMX 1000 - Manual (Page 17)

Chapter 2 – First Time Installation and Configuration
2-2
Figure 2-1 Replace RMX 1000 on the rack.
― Put the RMX 1000 on a safe, even, and clean surface.
3 Connect cables on the back panel of the RMX 1000:
― Power Cable: Firmly insert the plug into the power socket to prevent
poor contact.
― LAN Cable: Connect to the LAN1 port of the RMX 1000.
If you want to shut off the device, please first turn off the power switch. Do not directly
cut off the power supply or unplug the power cable.
Configuration Preparations
Obtaining Network Information
Before the first time configuration, obtain the information below from the
network administrator:
• Confirm the IP network type (H.323, SIP or H.323&SIP) and related
configuration information.
• The IP address, subnet mask, and default gateway IP address of the
RMX 1000 LAN port
• (Optional) DNS server address
• (Optional) Gatekeeper address, and the H.323 prefix and E.164 number
to be assigned to the RMX 1000
• (Optional) SIP server address
Obtaining Product Activation Key
Before using the RMX 1000, you need to register and activate the device.
Follow the procedure below to obtain the product activation key. When you
power on and log in to the RMX 1000 for the first time, the system displays
the Product Activation dialog box, requesting you to enter a Product
Activation Key.