Polycom RMX 1000 - Manual (Page 125)

Chapter 14 – RMX Utilities
14-8
SNMP Setting
RMX1000 supports the Simple Network Management Protocol (SNMP). You
can monitor the MCU status by managing the workstation.
Click the Setup ->SNMP Setting menu item at the upper left part to enter the
SNMP Properties interface.
Figure 14-8 SNMP Setting Page - Agent
Setting the Agent
Configure the following parameters on the SNMP Properties -> Agent
interface:
Table 14-5 Parameter Configuration of SNMP Agent
Parameter Description
SNMP Enabled
With this option selected, the administrator is allowed to
manage the RMX 1000 system with SNMP from a far end.
Only after the SNMP function is enabled, can you configure
the following parameters.
Retrieve MIB Files
You can export MIB files by clicking this button.
Contact person for
this MCU
Specifies the name of the person who manages this MCU
from a far end
MCU Location
Specifies the location of MCU
MCU System
Name
Specifies the system name of MCU
SNMP Agent
Version
Specifies the SNMP agent version used by MCU
ƒ Version 1 and Version 2 - When this option is selected, you
need to configure Community Name.
ƒ Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need
to configure User Name, Security Level and related
options.