Modifying a profile, Deleting a profile, Setting a default profile – Polycom RMX 1000 User Manual

Page 53: Video settings

Advertising
background image

Chapter 4 – Conference Profiles



4-14

Table 4-14

Parameter Description of Advanced Options

Parameter

Description

Video Clarity

This option is enabled by default. It is used to improve the

clarity of video received from an endpoint which has low

bandwidth and/or low resolution.

Lost Packet
Recovery

Lost Packet Recovery (LPR) is an algorithm designed to

protect IP video calls against the impact of network packet

loss. This option is enabled by default. In case of packet loss

during network transmission, the packet recovery mechanism

will be automatically activated if the endpoint experiencing

packet loss also supports the LPR protocol. This function can

effectively improve the decreased video quality caused by

packet loss.

Echo Suppression

This option is enabled by default. It is used to prevent the

sound of near site echoing being played to the far site(s).

Keyboard Noise
Suppression

This option is disabled by default. It specifies whether the

system mutes audio sent to the far site when keyboard tapping

sounds are detected at the near site(s).

Modifying a Profile

To modify a saved profile, right-click in the Profile list, and then click Profile
Properties
to modify its properties.

Deleting a Profile

To delete an existing profile, select it in the Profile list, and then click

.

Alternatively, right-click the profile to be deleted and then click Delete
Profile
.

A profile in use cannot be modified or deleted.

Setting a Default Profile

After a default profile is set, the endpoint will use it when creating a
conference directly through the remote control. In addition, when a user
creates a meeting room, reserves a conference or holds an instant conference
via the Web interface, the default profile will be used unless otherwise
specified.

To set a default profile, right-click the profile to be defined in the Profile list,
and then click Set as Default. After that, the icon of the profile becomes

.

A profile with the AES encryption function enabled cannot be set as the default profile.

Advertising
This manual is related to the following products: