Polycom RMX 1000 - Manual (Page 18)

Polycom RMX 1000 User Guide
2-3
1
Enter http://portal.polycom.com in the address bar of the browser to
access the login page of the Polycom resource center.
2 In the login box, enter your Email address and password, and then click
Login. If you are a new user, click the Register for an Account link for
registration.
3
Click Service & Support–> Product Activation -> Overview in the
upper navigation bar on the interface.
Figure 2-2 Service & Support Interface
4
Enter the Activate Your Product page. Enter the License Number and
Serial Number of the product in the Single License Number pane, and
then click the Generate button. You can find the license number and
serial number of the product from the document provided with the RMX
1000. Record the activation key displayed in the Key Code field.
Figure 2-3 Activation Key Generating Page
First Time Configuration
Connect PC to RMX 1000
1 Connect your PC to the LAN1 port (the LAN1 port is enabled by default)
of the RMX 1000 with a cross - over network cable, or connect your PC
and RMX 1000 to the same switch in the LAN. Turn on the power switch
at the RMX 1000.
2 Configure the IP address for your PC, which is in the same network
segment as the IP address of the RMX 1000.
3
The default IP address of the RMX 1000 before delivery is: