Polycom RMX 1000 - Manual (Page 129)

Chapter 14 – RMX Utilities
14-12
Logger Diagnostics Files
The system supports logging and can record and save the system
information continually. You can save the log files to your local hard disk for
system analysis and diagnosis.
The log program will be activated once the system starts. However, if you
manually reboot the system or something goes wrong with the log program
(such as a hardware drive error occurs when saving the log files,) the data
generated during this period will not be saved.
To view the log files, click the menu option Administration -> Logger
Diagnostics Files on the top-left of the page. The log page appears.
Figure 14-12 System Log
This page consists of a list of recorded log files with their corresponding
creation times and the following function buttons:
• Refresh List - refresh the log list to show the newly created log files
• Select All - select all the log files in the list
• Get Files - save the selected log files to a specified location
To save the log files to a local location:
1 In the log list, select the log files to be saved. Click the Select All button
to select all the files. To select multiple files, Ctrl-click or Shift-click the
files you want according to the Windows operation.
2 Click the Get Files button, set a target storage path in the pop-up Save
Files dialog box, and then click OK to save the files.
Software Management
You can backup and save all the configurations on the current device to your
local PC for future use. You can use the backup configuration file to restore
the device configuration if necessary.