Polycom RMX 1000 - Manual (Page 144)

Polycom RMX 1000 User Guide
16-3
After joining the conference, you can use any arrow key on the remote
control to invoke the function menu, so as to perform some specific function
operations.
Figure 16-2 Function Menu – Regular Participant Interface
If you have no operation for a certain period on the PCM menu interface, the system
automatically goes back to the conference image.
Definitions of DTMF & FECC Keys
You can control RMX 1000 using FECC and DTMF functions of the remote
control. When your endpoint supports FECC or DTMF, use the remote
control to operate the PCM menu interface.
On the PCM menu interface, you can select each function menu by pressing
the up arrow/down arrow key on the remote control, and go to the
next-level page of the highlighted menu item by pressing the right arrow key.
If you continuously press the up arrow key or down arrow key, you can
cyclically switch between the first menu page and the second menu page. In
addition, you can, according to the number of each menu item, press the
corresponding number key on the remote control to fast enter this page.
The table below defines in details the FECC and DTMF operation keys on the
remote control of Polycom endpoint.
Table 16-2 FECC Control Keys
FECC
Token
Description
ƒ Return to the higher-level menu
ƒ Delete the character before the cursor (while inputting menu names)
ƒ Exit the menu and display the video (if the top level menu is
displayed)
ƒ Shift the selection to the left video
ƒ Bring up the menu (if the conference videos are displayed)
Function
Options
Menu Title