L_sdintegrateaxis, L_sdintegrateaxis1, Modulo to a master pos – Lenze E94A User Manual

Page 461: Fb integ, 5function blocks

Advertising
background image

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05

461

5

Function blocks

5.124

L_SdIntegrateAxis - speed to position integration (with TP correction)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5.124

L_SdIntegrateAxis - speed to position integration (with TP correction)

This FB integrates a speed to a position.

• In contrast to the FB

L_SdIntegrate

, in the case of this FB a correction of the position output via

touch probe can additionally be effected, i. e. the integrator considers the time from the detec-

tion of a touch probe to the next task cycle.

• The bLoadStartPos input serves to load the starting position pending at the dnStartPos_p input

into the integrator.

• A touch-probe-exact (mark-controlled) start of the integrator can be carried out.
• In addition to the position, the resulting speed is shown at the output dnSpeedOut_s.
• The FB can be used for all measuring systems (modulo/limited/unlimited).

Inputs

Function library:

LenzeServoDrive

FB is available as of library V02.03.xx.xx!

Runtime software licence:

Motion Control HighLevel

Motion Control TopLevel

Identifier/data type

Information/possible settings

dnSpeedIn_s

DINT

Speed in [rpm]

• 15000 rpm ≡ 2

26

≡ 67108864

• Display parameter: C04352

bLoadStartPos

BOOL

Load integrator with starting position and reset error output.

TRUE Load the integrator with the value applied to input dnStartPos_p and

reset bError to FALSE.

dnStartPos_p

DINT

Starting position in [inc] with which the integrator is loaded by setting

bLoadStartPos to TRUE.

• C04353 indicates the starting position in the real unit of the machine.

dnTpPos_p

DINT

Position of the touch probe sensor in [increments].

• C04354 indicates the position in the real unit of the machine.

dnTpTimeLag

DINT

Input for accepting the touch probe time stamp

• Connect this input with the output dnTouchProbeTimeLag of the corresponding

touch probe system block.

GQ3RV2XWBS

GQ6SHHG,QBV

E/RDG6WDUW3RV

GQ6WDUW3RVBS

$[LV'DWD

/B6G,QWHJUDWH$[LV

E(UURU

GQ6SHHG2XWBV

&

&

&

&

&

6WDWH

GQ7S7LPH/DJ

E7S5HFHLYHG

&75/

GQ7S3RVBS

&

& 6SHHGXQLW

& 3RVLWLRQXQLW

Advertising