Lenze 8400 StateLine - Manual (Page 1010)

17 Function library
17.2 System blocks
1010
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
17.2.22 LS_SetError_1
Parameterisable responses to user-defined events are tripped.
17.2.23 LS_SyncManagement
Output of status information for synchronising the internal time base.
17.2.24 LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.

Note!
The real length of the low or high level at the bSquareWave output is always 1 ms higher
than set in C00400/1 or C00400/2 . If "0 ms" is set, a level with a length of 1 ms is created
length, for instance, and if "1000 ms" is set, a level with a length of 1001 ms is created.
Parameter Possible settings Info
C00400/1 0 ms 60000 Length of the low level (break) + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/2 0 ms 60000 Length of the high level + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/3
(from version 06.00.00)
0 ms 60000 Delay of the status bFirstCycleDone
• Lenze setting: 100 ms

For a detailed description see the main chapter "Diagnostics & error management":
 "LS_SetError_1" system block ( 471)

For a detailed description see main chapter "Synchronisation of the internal time base of
the controller":
 Internal interfaces | System block "LS_SyncManagement" ( 576)

For a detailed description see the main chapterl " Parameter change-over ". ( 577)