Lenze 8400 StateLine - Manual (Page 108)

5 Motor control (MCTRL)
5.1 Motor selection/Motor data
108
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Other motor data
Click the Other motor data... button and go to the Other motor data dialog box including the motor
equivalent circuit (in the following for an asynchronous motor):
• From version 12.00.00 onwards , C01000 displays the set motor type (ASM or PSM).
• Generally, a synchronous motor without speed feedback can also be operated with the V/f
characteristic control (VFCplus) control mode. The parameters for this control mode (e.g. V/f
base frequency) thus also have an according influence on synchronous motors.
Parameter Info ASM PSM
C00084 Motor stator resistance  
C00085 Motor stator leakage inductance  
C00082 Motor rotor resistance 
C00095 Motor magnetising current 
C00092 Motor magnetising inductance 
C00015 VFC: V/f base frequency  
C00021 Slip compensation 
C00070/1 SLVC: Vp speed controller 
C00071/1 SLVC: Ti speed controller 
C00075 Vp current controller  
C00076 Ti current controller  
C00273 Moment of inertia  
C00016 VFC: Vmin boost  
C00070/3 SLPSM: Vp speed controller  
C00071/4 SLPSM: Ti speed controller  
C00011 Appl.: Reference speed  
C00022 Imax in motor mode  
C00966 VFC: Time const. slip comp. 
C00982 VFC-ECO: Voltage reduction ramp 
C00073/1 VFC: Vp Imax controller  