Toa D-2000 Series Installation - Manual (Page 13)

13
• D-Section
7
8
10
9
12
Note: Refer to p. 12 for names and functions of parts 7 – 10.
12. Rotary encoders (1 – 8)
Adjust the volume of each input or output
channel. The volume increases as the encoder is
rotated clockwise, and decreases as it is rotated
counterclockwise. (The knob rotates endlessly.)
The volume indicators around the knob light
depending on the rotation of the knob.
Use the D-2000 Setting Software to perform
settings for the input or output channels for which
the volume is adjusted.