Toa D-2000 Series Installation - Manual (Page 56)

56
D-2008SP
Enabling the key lock function disables
the left and right key operation.
Lights
Hold down for approximately 5 seconds.
KEY LOCK
Goes out
Hold down for approximately 5 seconds.
KEY LOCK
8.1.5. Key lock function ON/OFF
Enabling the key lock function disables the following operations made on the D-2008SP's front panel.
• Recalling preset memories
• Selecting the input or output channel to be monitored
• Selecting the D-2012C's monitor channels
• Selecting CobraNet's monitor channels
[Setting the key lock function to ON]
Hold down the Set key for approximately 5 seconds while the Key
Lock indicator is unlit.
The Key Lock indicator then lights, enabling the key lock function.
[Setting the key lock function to OFF]
Hold down the Set key for approximately 5 seconds while the Key
Lock indicator is lit.
The Key Lock indicator goes out, disabling the key lock function.