Toa D-2000 Series Installation - Manual (Page 24)

24
2.4.13. D-972AE Digital Output Module
18. AES/EBU digital output terminal [AES/EBU, 1/2, 3/4]
(XLR-3-32 or its equivalent)
Digital output terminal of AES/EBU format.
(Pin 1: Ground, Pin 2: Signal, Pin 3: Signal)
Use the XLR-3-11C or equivalent for
connection.
Note
Use the digital audio cable with characteristic
impedance of 110 Ω for connection.
model D-972AE
DIGITAL OUTPUT MODULE
1/2
3/4
AES/EBU
AES/EBU
DIGITAL OUT
20
2.4.14. D-961SP Digital Output Module
19. Optical output terminal [OPTICAL 1, 2]
Optical output terminal of S/PDIF format.
20. Coaxial output terminal [COAXIAL 1, 2]
Coaxial output terminal of S/PDIF format.
Note
Use a coaxial cable with characteristic impedance of 75 Ω for
connection.
Each pair of the S/PDIF optical output and the coaxial RCA jack output
delivers output in parallel.
model D-961SP
DIGITAL OUTPUT MODULE
1
2
COAXIAL
OPTICAL
COAXIAL
OPTICAL
DIGITAL OUT
21
22
2.4.15. D-981 Remote Control Module
21. Contact input terminal [INPUT, C, 1, 2, 3, 4, 5, 6, 7, 8, C]
Removable terminal block, 8-circuit contact input terminal.
Individual contact functions are assigned by a PC using the D-2000
Setting Software supplied with the D-2008SP.
Note
Be sure to use the supplied removable terminal plugs (10P) for
connection.
22. Contact output terminal [OUTPUT, C, 1, 2, 3, 4, 5, 6, 7, 8, C]
Removable terminal block, 8-circuit contact output terminal.
Individual contact functions are assigned by a PC using the D-2000
Setting Software supplied with the D-2008SP.
REMOTE CONTROL MODULE
model D-981
C
C
8
C
OUTPUT
INPUT
C
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
23
24
2: Signal
1: Ground
3: Signal