Toa D-2000 Series Installation User Manual
Page 73
73
11.2. D-2012C Remote Console Unit
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Power cord (2 m or 6.56 ft) ....................................................... 1
Fader knob (Yellow)* ................................................................ 3
Fader knob (Red)* .................................................................... 3
Rack mounting screw 5 x 12 (with plane washer) .................... 4
Cable clamp .............................................................................. 1
Machine screw M3 x 6 .............................................................. 1
* Convenient for color coding to distinguish channels to which stereo link or group settings are assigned.
Model No.
D-2012C CE
D-2012C CE-AU/CN
D-2012C KR
D-2012C TW
Power Source
220 – 240 V AC,
220 – 240 V AC,
220 V AC,
100 – 120 V AC,
50/60 Hz
50 Hz
60 Hz
60 Hz
Power Consumption
18 W
Volume Adjustment
100 mm (3.94") motorized fader x 12, rotary encoder x 8
Line Input
1 channel (stereo), +10 dB* to –20 dB*, 10 kΩ, unbalanced, RCA jack
Headphone output
Stereo, 100 mW + 100 mW (at 32 Ω load), standard stereo phone jack
Monitor Bus
1 stereo input, 1 stereo output
Connector:
RJ45 connector
Connection Cable:
Shielded twisted pair (STP) Cat 5 or higher LAN
cable (data lines: 2 pairs)
Maximum Cable Distance: 100 m or 109.36 yd (between D-2012C and
D-2008SP)
LAN
Network I/F:
1 channel, 10BASE-T- or 100BASE-TX-compatible
network (switching: automatic recognition), RJ45
connector, connection via a switching hub
Network Protocol:
TCP/IP
Connection Cable:
Category 5 or higher shielded twisted pair cable
for LAN (CAT5-STP or better)
Maximum Cable Distance: 100 m or 109.36 yd (between D-2012C and a
switching hub))
Control
RS-232C: D-sub connector (9P), for maintenance use
Operating Temperature
5 to 40 °C (41 to 104 ºF)
Finish
Panel:
Surface treated steel sheet, laminated with
polycarbonate sheet, gray, mat finish
Rack mount bracket: Surface treated steel sheet, gray, mat finish
Dimensions
482 (w) x 266 (h) x 138 (d) mm (18.98" x 10.47" x 5.43")
Weight 6.6
kg (14.55
lb)