Toa D-2000 Series Installation - Manual (Page 31)

31
3.3. When Installing the D-2012C on a Desk
Attaching the D-2012AS Console Case to the D-2012C allows the D-2012C to be used on a desk.
3.3.1. Components of the D-2012AS Console Case
Side panel R
Machine screw
M4 x 25 (with washer):
11 pieces
Decorative panels
Machine screw M4 x 10:
4 pieces
Rubber foot: 4 pieces
Armrest
Side panel L
3.3.2. Attaching the D-2012AS Console Case
Step 1. Remove 3 screws on each side of the D-2012C to detach the rack mounting brackets.
The removed screws are not used.
D-2012C
Rack mounting bracket
Step 2. Attach the 4 rubber feet to the bottom surface of the
D-2012C using the 4 supplied screws.
Be sure to attach the rubber feet, as the air vents
are provided at the bottom surface.
Rubber foot*
Machine screw
M4 x 10*
* Component parts of the D-2012AS.