Dataman 48Pro - Manual (Page 29)

Dataman-40Pro
Description of Dataman-40Pro ISP connector
1
2
3
4
5
6
7
8
9
10
Front view of the ISP connector.
Depending on the device you want to program, the
specification of ISP connector pins may change. You can find it
in the control SW for the programmer (PG4UW), menu Device
/ Device Info (Ctrl+F1). Please be aware that the ISP
programming option of a given device must be selected. This is
indicated by a “ISP” suffix after the name of selected device.
For additional ISP information please refer to the device
manufacturer.
Note: Pin no. 1 is indicated by a triangle on ISP cable
connector..
Dataman-40Pro ISP cable
Warnings:
• When you use Dataman-40Pro as a ISP programmer, do
not insert a device in the ZIF socket.
• When you program devices in ZIF socket, do not insert
the ISP cable in the ISP connector.
• Use only included ISP cable. When you use other ISP
cables (other material, length…), programming may
become unreliable.
• Dataman-40Pro can only supply programming voltage.
Refer to ISP specs by device manufacturer for additional
information.
• Dataman-40Pro apply programming voltage to target
device and checks his value (target system can modify
programming voltage). If the programming voltage is
different as expected, no action with target device will be
executed.
Note: H/L/read Dataman-40Pro driver
29