Dataman 48Pro - Manual (Page 50)

If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command displays the size
of the device, organization, programming algorithm and a list of
programmers (including auxiliary modules), which supported
this device. You can find here Package and other general
information about the selected device is also available.
Select device ... / Only selected type
This window allows selecting the desired device type. First -
you must select a device type (e.g. EPROM, Prom, PLD) and
device subtype (e.g. 64Kx8 (27512)), using mouse or cursor
keys. A list of manufacturers and devices will then be
displayed.
Device can be selected by double clicking the line on which the
device is on or by entering manufacturer name and/or device
number in a search box (use a key <Space> as a separation
character) and press <Enter> or click OK button.
Press <Esc> or Cancel at any time to cancel device selection
without affecting the currently selected device.
Selected device is automatically saved to the buffer of default
devices (max. 20 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish to display additional information about the current
device, use the <Ctrl+F1> key. This command displays the
size of the device, organization, programming algorithm and a
list of programmers (including auxiliary modules) that support
this device. Package and other general information about the
selected device is also available.
Select device ... / Only selected manufacturer
This window displays the desired device by manufacturer. First
select a required manufacturer in Manufacturer box using
mouse or cursor keys.
Select the Device by double clicking the line the desired
device is on or by entering device number in the search box
(use a key <Space> as a separation character) and press
<Enter> or click OK button.
Press <Esc> or click Cancel at any time to cancel device
selection without affecting the currently selected device.
The selected device is automatically saved to buffer of default
devices (max. 20 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command displays the size
of device, organization, programming algorithm and a list of
50