Dataman 48Pro - Manual (Page 32)

• Serial E(E)PROM: IIC series
•
Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny,
ATmega series
• Microcontrollers Cypress: CY8C2xxxx
• Microcontrollers Elan: EM78Pxxx
• Microcontrollers EM Microelectronic: 4 and 8 bit series
• Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx,
PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
• Microcontrollers Philips: LPC series
Notes:
• (*1) - suitable adapters are available for non-DIL packages
• (*2) - there are only a few adapters for devices with more
than 40 pins. If you need to program devices with more than
40 pins consider a more powerful programmer such as the
Dataman-48Pro.
• For all supported devices see our Device list at
www.dataman.com .
I.C. Tester
• Static RAM: 6116 .. 624000
Programming speed
Device Operation Mode Time
27C010 programming and verify in ZIF 29 sec
AT29C040A programming and verify in ZIF 41 sec
AM29F040 programming and verify in ZIF 95 sec
PIC16C67 programming and verify in ZIF 10 sec
PIC18F452 programming and verify in ZIF 7 sec
AT89C52 programming and verify in ZIF 17 sec
PIC16F876A programming and verify ISP 5 sec
PIC12C508 programming and verify ISP 3 sec
System:
P4, 2.4GHz, USB 2.0, Windows XP
SOFTWARE
• Algorithms: only manufacturer approved or certified
algorithms are used. Custom algorithms are available at
additional cost.
• Algorithm updates: software updates are available approx.
every 2 weeks, free of charge.
• Main features: revision history, session logging, on-line help,
device and algorithm information
Device operations
• standard:
• intelligent device selection by device type, manufacturer or
partial part name
• blank check, read, verify
• program
32