Dataman 48Pro - Manual (Page 37)

Software
Run the control program
In Windows environment: double click to icon PG4UW.
After starting the control program, PG4UW automatically scans
all existing ports for a connected Dataman programmer.
Program PG4UW will try to find all supported Dataman-48Pro
and Dataman-40Pro programmers.
Note: When PG4UW is started, it performs an integrity check,
then displays a standard user menu and waits for your
instructions.
If the control program cannot communicate with the
programmer, an error message appears on the screen,
including error code and description of possible reasons
(disconnected programmer, bad connection, power supply
failure, incompatible printer port, ...). Eliminate the error source
and press any key. If error condition still exists, the program
resumes its operation in the demo mode and access to the
programmer is not possible. If you cannot find the cause of the
error, follow the instructions in Troubleshooting section. In
addition, the control program checks communication with
programmer prior to any operation with the programmed
device.
Description of the user screen
Windows program PG4UW
Header
bar the name, copyright statement and
version of the PG4UW control program
Menu bar list of basic functions
Filename information on the currently loaded file
in buffer
37