Dataman 48Pro - Manual (Page 65)

Software
Count down informs about Count down activity (Enabled or
Disabled)
Remains informs about the number of devices
remaining.
A successful operation means any device operation completed
without errors:
• program
• verify
• blank check
• erase
• read
If device operation terminates with error(s), it is not successful
operation.
When new device type is selected, all statistics values are set
to zero and Count down is Disabled.
Reset button in the Statistics panel reset statistics values.
Reload Count down button in Statistics panel reloads initial
value to Count down.
Device / Device options / Associated file
This command is used for associating a file with the current
device. This is a file, which can be automatic loaded to the
buffer after a device is selected.
You can edit the associated file name in the file name box, full
pathname is required. If enabled, the control program checks
the present of this file.
You can save both settings i.e. associated file and enabling of
automatic load of this file to disk by command File / Exit and
save.
Device / Device options / Special options
The special terms used here are exactly the terms used by
manufacturer of respective chip. Please read the
documentation to the chip you want to program for explanation
of all used terms.
Device / Blank check
This command performs a blank check on a device or part of a
device, if possible. The control program reports the result of
this action by a message to the INFO window.
The menu command Device / Device options / Operation
options allows the setting of parameters related to blank
check device operations.
65