QuickLabel 200 Kiaro! - Manual (Page 38)

Introduction
24 Kiaro! 200 User Guide
Switching the Printer On and Off
Switching the Printer On
Make sure that the power cable is connected properly, and then turn on the printer.
1 Turn on the power switch.
Cleaning is performed and the printer becomes ready for printing. When the
printer is in the Online mode, the STATUS LED stays lit.
Note: When the printer is in sleep mode, press the power key to return the printer to online
mode. The printer will also wake up from the sleep mode automatically as soon as it starts
receiving a print job.
5 Ink Warning LEDs • On - No ink or ink tank missing.
• Blinking - Low ink.
• Off - Sufficient ink.
6 Maintenance Cartridge Warning
LED • On - Full.
• Blinking - Nearly full.
• Off - Sufficient room to collect ink.
7 Media Out LED • On - Media out.
• Off - Media detected at media sensor.
8 ERROR LED • On - Operator-call error (can be recovered by user operation).
• Blinking - Fatal error.
• Off - Normal.
9 STATUS LED • On - Online mode.
• Blinking - Data being received (printing, cleaning, initializing,
shut-down).
• Off - Offline mode (during cleaning, etc.).
# Part Description