QuickLabel 200 Kiaro! - Manual (Page 63)

Designing and Printing Labels
Kiaro! 200 User Guide 49
Loading Media
Some steps for loading media will differ slightly depending on the Kiaro! 200 model
you are using. You can identify the Kiaro! 200 model based on whether it has a roll
cover over the supply mandrel area.
1 If your printer model has a roll cover, open it.
2 Ensure the power switch [1] on the supply mandrel is in the off position.
Note: The printer model on the left has the roll cover (not illustrated). The printer model
on the right does not have the roll cover.
Caution: Do not turn the supply mandrel by hand to advance the media. Turning the
mandrel by hand can result in printer damage.
3 Turn the mandrel adjustment knob [3] counterclockwise to loosen the mandrel.
4 Remove the outer flange [4] from the mandrel.
5 Orient a roll of label media [5] as illustrated and seat it on the mandrel. Ensure the
side of the roll contacts the inner flange [2].
[1]
[2]
[3]
[4]
[5]
[2]
[4]
[3]
[1]
[5]