Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 215)

201
A
PPLICATION
13. Enter Flow Meter Calibration Number
Enter the pulses/unit calibration number for the product flow meter.
Press NEXT to continue.
14. Enter Suggested Controller Name
Use the keyboard button to enter a controller name.
Press Finish to continue with the Operating Configuration Wizard.
15. Select Container
Use the drop-down list to select the Container that will be used with the equipment. Examples of
containers are spray solution and NH
3
tanks. Press New to add a container if required.
Press NEXT to continue.
16. Enter Container Capacity and Units
Enter the container Capacity using the on-screen keypad.
Select Units used to represent the Capacity of the container.
Press NEXT to continue.
17. Enter Container Name and Location
Use the keypad to enter a Container Name, and use the drop-down menu to enter a Container Location.
Press Finish and you will return to the Operating Configuration Wizard.
18. Enter Suggested Name for Configuration
Use the default name or enter a new name for the configuration.
Press FINISH, and continue the configuration process.
19. Add Equipment for Multiple Product Application
The Add Additional Application Equipment window appears. From here, you may add additional
equipment or controllers to your configuration. Add equipment by pressing the Add button and following
the Equipment Configuration Wizard.
Note: If you choose to add additional equipment,add them in the same order as the implements are attached.
20. Select Operating Mode
Select Rate Logging/Control from the drop-down list box.
Press NEXT to continue.
21. Select Controller
Press New to start the process of adding a new product control channel.
22. Select Serial Controller
Select Serial Controller from the drop-down list.
Press NEXT to continue.
23. Select Controller Make and Model
Use the drop-down list to select the desired controller.
Press NEXT to continue.