Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 48)

34
Markers Created At Run Screen
Press a markers button to map points with attached data in
the field. The example at the left shows a field that two rocks
and one tile inlet have been mapped in. Markers are defined
in Field Notes. For more information on Field Notes, see
“General Setup Overview” on page 12 .
Press the NOTE button to launch an on-screen dialog that
allows attaching a text memo to the current field location.
Multiple text memo items can be created in each field.
Select the type of Text Note from the items in the Category
list box. The pre-defined types available are: General, Pest,
Weed, Field, and Tile.
Use the on-screen keyboard to enter the text note and press
ACCEPT to finish.
M
AP
T
AB
M
AP
T
AB
B
ASICS
When an active configuration is selected at the Run Screen,
the Map tab and related functionality will be present.
Press the Load Rx button to load a GPS-referenced product application rate map. For
more information, see
“Variable Rate File Basics” on page 252, and subsequent pages in the
Application section.
Press the Load Reference button to load and display a background map from another
operation. An example of this is loading a reference map of a planted seed variety while
harvesting a crop. From the on-screen dialog box, select the desired operation and
attribute to display. Press Accept to continue.
The Clear Reference button is not active until there is a reference map loaded. Press this
button to clear the current reference map from the Run screen.
The Layers part of the Map Tab includes the following check box options:
• Data - Shows data displayed on current map.
• Guidance - Shows A line and B line for Autopilot or Lightbar users.
• Boundary - Displays boundaries loaded into the display.
• Reference - Shows reference map.
• Markers - Displays markers specified in Field Notes.