Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 24)

10
• Applied rate maps
• Product coverage maps
• Reference map
3. Swath Bar
This area of the Run Screen displays the current swath being harvested or applied. When operating in
Harvest mode, as shown in the figure above, width can be modified from the left or right to match the swath
width that is actually being harvested. When operating in Application Rate mode, this area will display
individual boom sections and their current status.
4. Control Tabs
Each Control Tab contains content specific to the current mode of operation. Examples of the various tabs
functionality include using the Field Notes feature, viewing and setting product control parameters, and
interaction with Ag Leader lightbars and Autopilot navigation controllers.
D
ISPLAY
I
TEMS
A
ND
A
REA
C
OUNT
5. Run Screen Display Items
This area of the screen displays the user's choice of
four different data items. The type of field operation
being performed determines what items are available
for selection. Any of the four display items can be
changed by pressing on that item and choosing a
different data item from a pop up list that is shown on
the display screen.
Examples of the different items made available are:
• Harvest:
• Yield
• Moisture
• Area
• Application Rate:
• Applied rate
• Applied area
• Total applied
6. Area Count Status
This button will be present when appropriate during harvest, planting, tillage operations and any other time data
is being logged to the display without controlling application rate. The button functions as a master area count
on/off switch. Area count can be turned on/off manually by pressing the button or will turn on/off automatically
when a header or implement switch is being used with the current operating configuration.