Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 80)

66
Shift by Rows option
If you have chosen the Shift by Rows option, use the first numeric
keypad to select the number of rows you wish to shift. Next, use the
second numeric keypad to select the row spacing in inches that
you wish to shift the pattern.
Use the bottom drop-down menu to enter the direction, (either left
or right), which you wish to shift the pattern relative to the AB Line.
Last, press Accept.
A
DJUST
A
UTOPILOT
S
TEERING
Adjust your vehicle's steering aggressiveness (defined as
how fast it responds to steering changes) by entering
information in the window below.
percentage number
Use the up and down arrows to select a percentage number. This
number must fall between 50 and 150 percent, and will vary
depending upon soil conditions, line acquisition time, as well as
your vehicle's size and steering axle movement.
• Accept
Press the Accept button after you have entered the desired steering aggressiveness.
A
UTOPILOT
G
UIDANCE
O
PERATION
About Guidance Patterns
The following pages define the available guidance patterns.
The AB Line is a line that runs between Point A and Point B, although you may not always set a Point B.
In most cases, the AB Line is the reference line for subsequent swaths.
When you press the Set A button on your display, the "A" point will appear on your display's screen.
When you press the Set B button, the "B" point will also appear on the screen, and the line between the
two points serves as your AB Line.
AB Pattern