Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 239)

225
A
PPLICATION
The Rate 1 and Rate 2 settings represent preset application rates that allow
operators to quickly change between desired target rates for each individual
product.
Note: The active rate button appears with a green background behind it.
The Target Rate Increment button allows operators to specify the increase or decrease
amounts used when Rate 1 or Rate 2 is selected. Use the numeric keypad to enter the
desired increment.
The Increase and Decrease buttons allow Product Application Rate to be changed according
to the Target Rate Increment.
In using manual valve control, the increase and decrease buttons allow the possibility of the
control valve to be defined by the operator.
Press the Down Chevron button, shown at left, to return to the Run Screen.
R
ATE
C
ONTROL
/L
OGGING
D
ISPLAY
I
TEMS
The Display Items selection window can be accessed by pressing on any one of the four display items
that are active on the Run screen.
Once the Display Items window is visible, press on the display
item you would like to display. It will then be available on the Run
screen.
• RATE button
Displays the actual rate per acre being applied.
• AREA button
Displays the area that has been applied for the region.
• TOTAL APPLIED button
Shows the total amount applied for the region.
• GROUND SPEED button