Apple Motion 3 - Manual (Page 878)

878 Chapter 10 Using Filters
Reduce To: Selects the number of colors in the reduced object. Choices are 4 Colors, 3
Colors, or 2 Colors.
Match Color 1: Picks the color of the first selection color for reduction. The color picker
can be expanded with the disclosure triangle to reveal Red, Green, Blue, and Alpha
sliders for more precise color selection.
Replace With: Picks the color that is substituted for the selection determined by Color
1.
Match Color 2: Picks the color of the second selection color for reduction.
Replace With: Picks the color that is substituted for the selection determined by Color
2.
Match Color 3: Picks the color of the third selection color for reduction. This parameter
is used only if Reduce To is set to 3 Colors or 4 Colors.
Replace With: Picks the color that is substituted for the selection determined by Color
3. This parameter is used only if Reduce To is set to 3 Colors or 4 Colors.
Match Color 4: Picks the color of the fourth selection color for reduction. This
parameter is used only if Reduce To is set to 4 Colors.
Replace With: Picks the color that is substituted for the selection determined by Color
4. This parameter is used only if Reduce To is set to 4 Colors.
Mix: Sets what percentage of the original image is blended with the filtered image.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the mix
control.
Colorize
Substitutes the blacks and whites in an image with different colors you select. All other
colors in the image are remapped to a duochrome range that falls between these two
colors.