Apple Motion 3 - Manual (Page 930)

930 Chapter 10 Using Filters
Add Noise
This filter adds an overlay noise of the selected type to an image. This filter causes
rasterization in 3D groups.
Parameters in the Inspector
Amount: Sets the amount of noise added to the image. Values range from 0 to 1.
Type: Sets the type of noise added to the image. Values can be selected from White
Noise (Uniform), Pink Noise (TV Static), and Gaussian Noise (Film Grain).
Monochrome: Toggles whether the added noise is monochrome or color.
Blend Mode: Sets the blend mode used to add noise to the image.
Autoanimate: Toggles whether the noise is animated automatically.
Random Seed: Sets the seed used to generate the position of the noise. This
parameter is only available if Autoanimate is turned off.
Mix: Sets what percentage of the original image is blended with the filtered image.
Values range from 0 to 100%.
HUD Controls
The HUD contains all the same controls as the Inspector, with the exception of the
control.
Original image Add Noise filter applied