Apple Motion 3 - Manual (Page 952)

952 Chapter 10 Using Filters
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the Mix
control.
Vignette
Simulates the light fall-off and blurring that can be seen in the corners of images as
seen through some camera lenses.
This filter causes rasterization in 3D groups.
Parameters in the Inspector
Size: Sets the size of the vignette. The larger the size, the more of the object is affected
by the vignette. Values range between 0 and 1.5.
Falloff: Sets the amount of feathering applied to the border of the vignette. The higher
the falloff, the softer the edge of the vignette. Values range from 0 to 1.
Blur Amount: Sets the amount of blur applied to the part of the image affected by the
vignette. Values range between 0 and 16.
Darken: Sets the amount the affected part of image is darkened by the vignette.
Values range between 0 and 1.
Saturation: Sets the amount of color saturation applied to the parts of the image
affected by the vignette. Values range from –1 to 1.
Mix: Sets the amount of the filtered frame to be mixed with the original source frame.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the Mix
control.
Original image Vignette applied