Apple Motion 3 - Manual (Page 942)

942 Chapter 10 Using Filters
 Height Map X Scale: Sets the scaling used to determine the width of the Height
Map. Values range from 0 to 10.
 Height Map Y Scale: Sets the scaling used to determine the height of the Height
Map. Values range from 0 to 10.
 Height Map X Offset: Sets the amount of offset used to position the Height Map
horizontally. Values range from 0 to 100%.
 Height Map Y Offset: Sets the amount of offset used to position the Height Map
vertically. Values range from 0 to 100%.
Mix: Sets the amount of the filtered frame to be mixed with the original source frame.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the Mix
control.
Line Art
Performs an edge detection of the high-contrast borders between regions of differing
brightness in an object, tracing the edges and reducing all other detail in the image to
the color specified by the Paper Color parameter. The color of the resulting outline can
also be customized. The result is to simulate the look of a a line drawing drawn on
paper.
This filter causes rasterization in 3D groups.
Parameters in the Inspector
Threshold: Sets the threshold of edge detection. Values range from 0 to 0.2.
Smoothness: Sets the level of smoothness of transition between the lines and the
background. Values range from 0 to 1.
Original image Line Art applied