Touch control – Metrohm 840 PC Control 5.0 / Touch Control User Manual

Page 158

Advertising
background image

3.19 Sample data

146

PC Control / Touch Control

Click on Action in the title line of the sample data silo.

You can use Insert line to insert a new silo line in front of the

selected line, delete the selected line with Delete line and clear the

whole of the current silo with Delete all silo lines. The settings

under Sample data silo/Properties are retained.
You can use Load sample data silo to open the dialog for loading a

sample data silo file and Save sample data silo to open the dialog to

save the current sample data silo. The procedure how to load and save

is described on page 151.
When all the existing silo lines have been processed and you would like

to refill the sample data silo then you can use Reset line number to

set the first line back to No. 1. With Silo line for balance you can

mark the selected silo line (>), into which the weight transmitted by a

balance is to be entered. If the sample data input for the silo line is

concluded automatically (see p. 150) then the marking will be

automatically set in the next line.
With Properties you can open the dialog Sample data

silo/Properties (see p. 149); Show help opens the online help for the

sample data silo and Close is used to close the sample data table

again.

Touch Control
With Touch Control a new dialog window is opened to show the sample

data silo. Apart from the column with the line number, a maximum of

Advertising