Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 93)

3 Operation
PC Control / Touch Control
81
3.11.1 Copying files
Select the file to be copied in the list of files and open the selection
of the memory location with [Copy].
Select the memory location into which the file is to be copied. The
file is copied.
You can only select a memory location that can currently be accessed.
If Card 1 or Card 2 cannot be accessed then you should exit the file
manager and define the path for the card (for PC Control – see p. 78)
or insert a card into the required card slot (for Touch Control) and then
copy the file. [Shared memory] can only be selected if an external file
system is configured (requires 847 USB Lab Link, see Section 3.10.11).
The file group is retained, i.e. the group will be newly created in the
memory location into which the file is copied if it does not already exist
there.
3.11.2 File properties
Select the file in the list of files whose Properties you wish to edit
and open the dialog Show files/Properties.
Various file properties are shown in this dialog.
You can select a different File group or enter a new file group in
which the file is to be stored. In this way the file can be "regrouped"
in the same memory.
You can activate Write protection for the file. As long as write
protection is switched on the file cannot be saved under the same
name, deleted, regrouped or renamed. The write protection in PC
Control is independent of the write protection in Windows Explorer
under Properties.