Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 163)

3 Operation
PC Control / Touch Control
151
Save sample data silo
Sample data silo files can only be saved on Card 1, Card 2 or a shared
file system (requires 847 USB Lab Link, see Section 3.10.11).
Open the selection Load/Save in the dialog Sample data silo.
Touch Control: If no card is inserted or no external file system is
shared, then the [Save] button is inactive.
Open the dialog Save. The procedure for saving a file is described
in Section 3.11.4
Load sample data silo
Sample data silo files can only be loaded from Card 1, Card 2 or a
shared file system (requires 847 USB Lab Link, see Section 3.10.11).
Open the selection Load/Save in the dialog Sample data silo.
Touch Control: If no card is inserted or no external file system is
shared, then the [Load] button is inactive.
Open the dialog Load and select [Card 1], [Card 2] or [Shared
memory] (if present).
Use [Show all] to open the list of files containing all the files or
[Show files] open the list of files for the selected group. Only
sample data silo files will be shown.
You can load the selected file with [Load]. The program then switches
automatically to the main dialog. You can remove the selected file from
the list of files with [Delete].
3.19.4 Export of sample data
The export of the sample data of the current determination is described
in Section 3.18.9.