Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 39)

3 Operation
PC Control / Touch Control
27
Note!
If you once have worked with login and password protection then it is
no longer possible to delete users from the list even if the password
protection is switched off again.
The list of users can only be printed out in a context-sensitive situation
from the dialog System settings/User administration and its
subdialogs by using the [Print] fixed key. This means that only users
with administrator rights can print out this list.
Enter an unambiguous identification under User, for example the in-
house abbreviated form of the name or the personnel number.
Each user name can only appear once in the list of users.
Under Full name enter the proper name of the user, i.e. given
name and family name.
Select the Dialog in which the user is to operate the system.
This setting is only effective when login is used. In Expert dialog all
functions are accessible. For Routine dialog the system-specific
routine dialog configuration is normally used (see Section 3.7.3). If each
user is to have separately defined routine dialog settings then you can
create an identification card for each user on which these settings are
stored (see Section 3.7.6). During login the dialog settings stored on
the card will be loaded automatically.
The user status normally remains active. It is a good idea to
deactivate a user when, for example, he or she is absent for a long time
or is no longer authorized to use the system. This user can then no
longer log into the system until the active status is reactivated.
You should activate the Administrator rights checkbox for each
user who is to have access to the user administration.
Note!
The last user with administrator rights cannot be deleted.
By clicking on [Signature method] you can access the edit dialog for
assigning the rights for using and signing methods. These settings are
only effective when login and password is used. Only methods with the