Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 178)

3.22 Result silo
166
PC Control / Touch Control
3.22.2 Saving and loading the result silo
Save result silo
Result silo files can only be saved on Card 1, Card 2 or a shared file
system (requires 847 USB Lab Link, see Section 3.10.11).
Open [Load/Save] in the dialog Results/Result silo. Touch
Control: If no card is inserted or no external file system is shared,
then the [Save] button will be inactive.
Open the Save dialog. The procedure for saving a file is described
in Section 3.11.4.
Note!
Not all determination data are saved with a result silo. If you want to
save determination data of all determinations, use the option Save
determination automatically (see Section 3.16.10).
Load result silo
Result silo files can only be loaded from Card 1, Card 2 or a shared file
system (requires 847 USB Lab Link, see Section 3.10.11).
Open [Load/Save] in Results/Result silo. Touch Control: If no
card is inserted or no external file system is shared, then the [Load]
button will be inactive.
Open the dialog Load and select [Card 1], [Card 2] or [Shared
memory] (if present).
Use [Show all] to open the list of all the files or [Show files] to
open the list of files for the selected group. Only result silo files will
be shown.
You can use [Load] to load the selected file. You can remove the
selected file from the list of files with [Delete].