Sony Multi Interface Shoe Adapter - Manual (Page 1012)

Cha
p
te
r 22
DCU S
e
tu
p
(DCU)
1012
GPI Input Setting (GPI Input Assign Menu)
state of the cross-point is restored. If the GPI trigger is applied repeatedly at
short intervals (0.5 second or less), the cross-point switching may not be
carried out correctly. In this case, apply the GPI trigger again.
• If “SWR Format” or “System Format” is selected for “Action” when the
format converter is used, you can set the conversion formats of the format
converter for “FC Input 1-8.”
Carrying out level settings
To set the low level and high level, first set the trigger type to “Level,” then use
the following procedure.
1
In the DCU >GPI Input Assign menu, select the action to be set, and press
[H/L Set].
The H/L Set menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
3
To apply the selection made in step 2 when the input is the GPI high level,
press [H Set]. To apply the selection made in step 2 when the input is low,
press [L Set].
This confirms the setting, which appears in the status area.
Knob Parameter Adjustment Setting values
1 No Signal format/screen aspect ratio
selection 1 and upwards