Sony Multi Interface Shoe Adapter - Manual (Page 207)

207
Key Snapshots
C
h
ap
te
r 4
K
e
ys
Saving a key snapshot
For example, the following procedure saves the state of the DSK1 settings.
1
Press the key delegation button [DSK1], turning it on.
2
Press the [K-SS] button, turning it on.
The system switches to key snapshot mode, and the key source name
display/key snapshot buttons show the status of registers 1 to 4 for DSK1.
Off: Nothing is saved in the register.
Lit orange: Settings are saved in the register.
For a register holding a snapshot, the register name is shown as up to eight
characters.
3
Hold down the [K-SS STORE] button, and press the key source name
display/key snapshot button corresponding to the register in which you
want to save the snapshot.
The key source name display/key snapshot button which you pressed lights
yellow.
Note
If you save a key snapshot in a register for which the button is lit orange or
yellow, the existing contents of the register are overwritten.
Recalling a key snapshot
For example, the following procedure recalls the state of the DSK1 settings.
1
Press the key delegation button [DSK1], turning it on.
2
Press the [K-SS] button, turning it on.
3
Press the key source name display/key snapshot button corresponding to
the register you want to recall.
The button you pressed lights yellow, and this recalls the key snapshot.
To cancel the recall, press the [UNDO] button.