Sony Multi Interface Shoe Adapter User Manual
Page 1016
Cha
1016
GPI Output Setting (GPI Output Assign Menu)
a) 1: Field 1, 2: Field 2, 3: Any
When “
” is selected as the trigger polarity, there is no Pulse Width
setting. When “Status” is selected, there is no Pulse Width or Timing
setting.
4
In the <Source Device> group, select the control panel or DCU to handle
the GPI output.
SCU1:
ID1 control panel (PNL1)
SCU2:
ID2 control panel (PNL2)
SCU3:
ID3 control panel (PNL3)
DCU1:
ID1 DCU
DCU2:
ID2 DCU
When the action set in the following step
5
is carried out on the control
panel selected here, this causes a GPI output. It is also possible to output
error information. When the DCU is selected, you can output error
information by means of the action set in step
5
.
5
Using any of the following methods, select the action you want to set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
a)
• Action list when the trigger type is other than “Status”
When Source Device is SCU: M/E1 Key1 SS ? Recall, M/E1 Key2 SS ? Recall, M/E1
Key3 SS ? Recall
M/E1 Key4 SS ? Recall, M/E2 Key1 SS ? Recall, M/E2 Key2 SS ? Recall, M/E2
Key3 SS ? Recall, M/E2 Key4 SS ? Recall
M/E3 Key1 SS ? Recall, M/E3 Key2 SS ? Recall, M/E3 Key3 SS ? Recall, M/E3
Key4 SS ? Recall
P/P DSK1 SS ? Recall, P/P DSK2 SS ? Recall, P/P DSK3 SS ? Recall, P/P DSK4
SS ? Recall
Editor GPI-?? (executable only when the BZS-8050 license is valid)
No Action
When Source Device is DCU: No Action
•
Action list when the trigger type is “Status”
Knob
Parameter
Adjustment
Setting values
3
Pulse Width
Pulse width
1 to 60 (fields)
4
Timing
Output timing
1 to 3
a)
Knob
Parameter
Adjustment
Setting values
2
Action
Action selection
1 and upwards
a)
5
Reg No
Snapshot register number
1 to 4
b)
5
GPI No
GPI number selection
1 to 32
c)