Sony Multi Interface Shoe Adapter - Manual (Page 515)

515
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
2
To make transition settings, press [Transition] and set the following
parameters.
3
To set the partition method, press [Partition] and set the following
parameters.
• When Bar was selected in step 1
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
• When Wedge was selected in step 1
To set the wedge center position
When Wedge is selected in the <Mode> group, you can set the wedge center
position.
1
Press [Position].
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Knob Parameter Adjustment Setting values
1 Rotation Number of rotations of the blocks –8.000 to +8.000
2 Perspective Degree of randomness in distance
moved by each block 0.000 to 100.000
Knob Parameter Adjustment Setting values
1 Width Width of partition 0.000 to 100.000
2 Offset Degree of randomness in partition
width
–5.000 to +5.000
a)
–20.000 to 20.000
b)
3 Angle Starting angle of effect –8.000 to +8.000
Knob Parameter Adjustment Setting values
4 No Width of blocks 0.000 to 100.000
5 Phase Partition position –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal center position
–8.000 to +8.000
a)
–32.000 to +32.000
b)
2 V Vertical center position
–6.000 to +6.000
a)
–18.000 to +18.000
b)